Stainless Steel Nipples - Uses

10/11/2023

A nipple is a short piece of pipe that is used as a fitting to connect piping in plumbing applications. Nipple fittings are produced in various materials, although stainless steel nipples are the most common due to their strength and durability.

Stainless steel nipples are usually made with male pipe thread (MPT) connections on both ends, connecting two separate female threaded pipes and fittings. The connection allows for a watertight seal between the fittings.

Stainless steel nipples are primarily used in low-pressure piping systems, and the type of nipple used will vary with the size, temperature, and working pressure of the system. Therefore, depending on the specific application, there are various types of pipe nipples to choose from. This article will outline the uses of different types of stainless steel nipples.

Stainless Steel Nipples - Uses

Different types of stainless steel nipples are designed for different uses and applications. While there is some potential overlap between different pipe nipples, each has specific design features that determine the most appropriate use.

Barrel Pipe Nipple

Barrel nipples are tapered NPT threaded on both ends and have an unthreaded section in the middle. These are some of the most common types of pipe nipples, and due to their inherent strength and easy-to-remove design can be used in various applications to fit female threaded piping together.

T.O.E Pipe Nipple

T.O.E stands for threaded one end. T.O.E pipe nipples have one threaded end and one non-threaded end. Unlike other types of T.B.E (threaded both end) nipples, these are not used to fit piping together and are commonly used as legs for oil tanks.

Close Pipe/Running Pipe Nipple

A close pipe nipple is a stainless steel nipple that does not have an unthreaded section in the middle. These types of pipe nipples are also known as running nipples. These pipe nipples are designed such that connected fittings come very close to one another, leaving very little of the pipe nipple exposed.

Generally, close or running pipe nipples are difficult to work with as they can easily become damaged upon removal unless specialty equipment is used.

Shoulder Pipe Nipple

Shoulder pipe nipples are longer than close nipples and have a very small section of unthreaded pipe in the middle. However, this unthreaded section is not large enough to fit a pipe wrench to remove the nipple.

Hexagonal Pipe Nipple

Also known as a Hex pipe nipple, these are designed with a hexagonal-shaped middle section. This allows one to securely grasp the nipple with a wrench to tighten or remove it. This design feature provides a greater mechanical advantage than that of a normally rounded nipple. Hence, hex pipe nipples are used in various applications where nipples need to be regularly removed or replaced.

Reducing/Unequal Pipe Nipple

Reducing or unequal pipe nipples are designed to allow a female fitting with a large connection to attach to a relatively smaller one. These are normally used for piping systems where a change in pipe dimension and flow pressure is necessary.

Hose Pipe Nipple

A Hose pipe nipple is designed with a male threaded connection on one end and a hose barb on the other end. These are normally used for piping systems that require a pipe to be connected to tubing.

Welding Pipe Nipple

A welding pipe nipple has a male threaded connection on one end and a standard cut pipe on the other end. Once the unthreaded end is welded and connected, fitting a pipe to the threaded end becomes much easier. Welding pipe nipples are normally used in piping systems that require welding to connect components.

Conclusion

Given that there are so many different types of pipe nipples and so many possible applications, choosing the right one can be rather confusing. The list of pipe nipple types above, along with their potential uses, should help you choose the correct stainless steel nipples for your piping system so that you can avoid leakages, inefficiency, or some damage.

Frequently Asked Questions

What are the most common types of pipe fittings?

The most common types of pipe fittings include couplings, elbows, tees, reducers, adapters, unions, and caps. Each serves a specific purpose in a piping system. Couplings connect pipe sections, elbows change flow direction, tees split or combine flow, and reducers connect different pipe sizes.

At Titan Fittings, we offer a variety of stainless steel fittings designed to provide secure, reliable connections for industrial, hydraulic, and fluid-transfer applications.

How do I measure pipe fittings accurately?

To measure pipe fittings accurately, first identify whether the connection has male or female threads. Measure the outside diameter of male threads or the inside diameter of female threads using a caliper. Next, determine thread pitch using a thread gauge and identify the thread standard, such as NPT or BSP.

Compare these measurements with a thread identification chart. Also verify the nominal pipe size, connection type, and applicable pipe schedule to ensure compatibility.

Titan Fittings provides technical resources to help customers identify and select correctly sized fittings.

What are brass pipe fittings used for?

Brass pipe fittings are commonly used in plumbing, water distribution, compressed air systems, HVAC equipment, and certain industrial applications. Brass offers good machinability, moderate strength, and corrosion resistance in compatible environments.

However, stainless steel may be a better choice for demanding industrial applications involving high pressures, aggressive fluids, or corrosive environments.

Titan Fittings helps customers evaluate fitting materials based on application requirements, pressure ratings, temperature, and fluid compatibility.

How do I connect two pipes of different sizes?

To connect pipes of different sizes, use a reducing coupling, reducer, or reducing adapter that matches the pipe diameters and connection types.

Concentric reducers maintain a common centerline, while eccentric reducers provide an offset that may be useful for drainage, venting, or avoiding air pockets in certain piping configurations.

Titan Fittings offers stainless steel reducers and adapters for connecting different sizes and fitting configurations while maintaining system integrity.

What industries commonly use pipe fittings?

Pipe fittings are essential in oil and gas, chemical processing, industrial manufacturing, hydraulic equipment, HVAC, agriculture, food processing, and data center liquid cooling.

These industries depend on fittings to connect components, control flow direction, accommodate diameter changes, and maintain reliable fluid or gas transportation.

Titan Fittings supplies industrial fitting solutions for applications requiring dependable performance, material compatibility, and pressure-rated connections.

Why is it important to choose the right pipe fitting?

Choosing the correct pipe fitting helps prevent leaks, pressure loss, premature wear, corrosion, and unexpected equipment downtime.

An improperly selected fitting can compromise system reliability even when the surrounding equipment is correctly specified.

At Titan Fittings, we recommend evaluating material grade, pressure and temperature ratings, thread compatibility, connection dimensions, and operating conditions before selecting a fitting.

Are stainless steel fittings better than brass fittings?

Stainless steel fittings are often preferred for demanding industrial applications because of their strength, durability, and corrosion resistance. Brass fittings are generally more economical and easier to machine, making them suitable for many lower-pressure plumbing and general-purpose applications.

Neither material is universally better. Titan Fittings recommends selecting the material that best matches the operating pressure, fluid chemistry, temperature, environment, and service-life requirements.

Are stainless steel fittings stronger than brass fittings?

Stainless steel fittings generally offer higher mechanical strength than comparable brass fittings, making stainless steel a frequent choice for demanding industrial and high-pressure applications.

However, actual fitting performance depends on the alloy, geometry, manufacturing process, temperature, and published pressure rating.

Titan Fittings recommends selecting fittings based on verified component ratings rather than assuming every stainless steel fitting can withstand higher pressure than every brass fitting.

Which fitting material (Brass or Stainless Steel) is better for high-pressure hydraulic systems?

Stainless steel is often a preferred material for high-pressure hydraulic applications because of its mechanical strength and durability.

However, the correct choice depends on the specific fitting's rated working pressure, sealing design, temperature, and compatibility with the hydraulic fluid.

Titan Fittings recommends using pressure-rated stainless steel hydraulic fittings that meet the system's operating and applicable safety requirements.

Can compression fitting ferrules be reused?

Compression fitting ferrules undergo controlled deformation during their initial installation to grip the tubing and establish a reliable seal.

Previously swaged ferrules generally should not be removed and installed on new tubing because their deformation and gripping characteristics have changed.

Titan Fittings recommends using new ferrules for new tube connections. Reassembly of an existing fitting with the original ferrules attached to the same tubing is a separate procedure that may be permitted by the manufacturer.

What causes reused compression fittings to leak?

Compression fittings may leak after improper reuse because of damaged ferrules, altered sealing surfaces, scratched tubing, contamination, misalignment, or incorrect reassembly.

Removing preswaged ferrules and attempting to install them on different tubing can also compromise the original gripping and sealing geometry.

Titan Fittings recommends inspecting previously assembled components and replacing damaged parts before returning a connection to service.

When should instrumentation fitting ferrules be replaced?

Ferrules should be replaced when they show damage, cracking, excessive wear, corrosion, or other conditions that compromise sealing performance.

New ferrules are generally required when creating a new connection on fresh tubing rather than reassembling an existing qualified assembly.

Titan Fittings recommends following the applicable fitting manufacturer's replacement and reassembly instructions instead of reusing questionable components.

How do you prevent galling in stainless steel threaded fittings?

Thread galling can be reduced by using compatible lubricants or anti-seize compounds where appropriate, keeping threads clean, avoiding cross-threading, and preventing excessive tightening speed or force.

Properly matching threads and following manufacturer installation instructions are also essential.

Titan Fittings recommends inspecting threaded components before assembly and replacing fittings with damaged threads.

Can stainless steel fittings be reused after galling occurs?

Fittings with significant galling, torn threads, or seizure damage generally should not be reused.

Damaged threads can compromise engagement, sealing performance, and the connection's mechanical integrity.

Titan Fittings recommends replacing visibly damaged components rather than attempting to restore severely galled threads for pressure-containing service.

More questions: Pipe Fittings: Types, Applications & Selection

10/11/2023